Skip to content

Professional Installation Guide: Infinite Whitening Activation for Philips Zoom Systems

The Infinite Whitening Activation Chip is available in two versions: pre-mounted to a light guide (plug and play, no installation needed), or as a chip only, which you fit into your original light guide head yourself with a small screwdriver or spatula.

Not sure the Activation Chip fits your model? Check the Philips Zoom compatibility guide first. You can order the Activation Chip or the complete light guide from the shop, and the light guide FAQ answers the most common questions.

Option 1 — Chip + Light Guide (Easiest)

The light guide comes with the Infinite Whitening chip pre-mounted and is plug and play. No installation needed — simply remove the old light guide, plug in the new one, and power on. The display shows 4/4 sessions immediately.

Option 2 — Chip Only

Replace the original chip in your original light guide head with the Infinite Whitening Activation Chip. You need a small screwdriver or spatula to lift out the original chip and fit the new one, a simple job for dentists used to working in millimeter-sized areas. For the step-by-step video see below.

FeatureInfinite Whitening ChipOriginal Light Guide
Session CapacityUnlimited Sessions4 Sessions Only
Reset MechanismPower Cycle (Off/On)Manual Replacement Required
Cost StructureOne-Time InvestmentRecurring Cost (~$100/patient)
CompatibilityWhiteSpeed & Advanced PowerWhiteSpeed & Advanced Power
Warranty10 Years Full Support3 months Warranty

How to Install — Chip + Light Guide Version

  • Step 1: Power off the Philips Zoom device completely.
  • Step 2: Remove the light guide from the device.
  • Step 3: Plug in the Infinite Whitening light guide.
  • Step 4: Power on — display shows 4/4 sessions.

How to Install — Chip Only Version

  • Step 1: Power off the Philips Zoom device
  • Step 2: Remove the light guide and extract the original card
  • Step 3: Insert the Infinite Whitening card into the card slot
  • Step 4: Reassemble the light guide and reattach to the device
  • Step 5: Power on — display shows 4/4 sessions

For detailed card-only installation instructions, watch the video below.

Which Version Should I Choose?

Choose the pre-mounted version if you want the fastest start: remove the old light guide, plug in the new one and power on. Choose the chip-only version if you already have a light guide and want to replace the chip yourself. You need a small screwdriver or spatula.

Before You Install

  • Confirm that your system is a Philips Zoom WhiteSpeed, Advanced Power or Advanced Power Plus. The compatibility guide lists the supported models.
  • Power the device off completely before you remove or mount anything.
  • Check that the light guide is physically suitable for use. The Activation Chip restores the session counter; it does not repair a damaged light guide.
  • Use the chip only in a professional dental setting.

After Installation

Power the device on. A correctly installed Activation Chip makes the display show 4/4 sessions. Each time you switch the system off and on again, the counter returns to 4/4, so a light guide that remains physically suitable can be used for unlimited whitening sessions.

If the display does not show 4/4 sessions, power the device off, remove the light guide, check that the card is seated correctly and try again. If the problem continues, contact our support team on WhatsApp or through the contact page.

Need Help With Installation?

If you are unsure about compatibility or which version suits your clinic, send us a photo of your Zoom control panel through the contact page or on WhatsApp, and we will confirm compatibility before you order. The installation video above shows the card-only version step by step, and the light guide FAQ covers sessions, warranty and replacement questions.

See how simple it is.

Installing the Module to the Light Guide

Worldwide Availability and Universal Voltage Compatibility 

Infinite Whitening ships to over 26 countries via express courier. Compatible with all regional Philips Zoom voltage standards (110V–240V). Support is available via WhatsApp — we respond as quickly as possible.

Worldwide Express Shipping Available

Infinite Whitening Global Shipping for Professional Philips Zoom Compatible Activation Chip to USA, Europe, Asia, and Worldwide